AQM

OdorXit ClO2 AQM Product Information

You can use AQM/CL02 gas in any enclosed area such as your home, car, office, bathroom, hotel room, hospital room, wherever you have odors caused by mold, and smoke and more.

Chlorine Dioxide (ClO2) gas has been around since the mid 1800's cleaning wood pulp in paper plants, but because of the chemicals used and procedures and machinery required to produce the gas it was always dissolved in water. 

With the recent advancements in packaging materials and technology making pure ClO2 gas very much easier and safer than ever before possible. This means you can place a package in an enclosed area such as:
  • a car with cigarette smoke embedded in the leather, carpeting, doors
  • a closet with skunk smell
  • under a porch with skunk smell
  • mold in your bathroom, bedroom, basement, throughout your house
  • Safe and effective use of OdorXit CL02 eliminates odors produced by fungus and spores in your home, car, and place of work.
One product used 2 different ways!
The OdorXit AQM CLO2 used in 30 day mode produces small amounts pure chlorine dioxide gas for 20 to 30 days (depending on the amount of humidity). The odors are gone. 
The OdorXit AQM CLO2 used in 30 day mode – the same packet as used in the one day mode just adding more moisture - allows you to be in the room while it's working. There's no problems with breathing this product when used as directed.

The OdorXit AQM CLO2 used in 1 day mode – same packet as used in the 30 day mode - produces 30 times as much chlorine dioxide as the slow mode and will treat smaller enclosed areas in as little as an hour and a room or house sized area in less than one day. This process is recommend for few projects as it doesn’t give the vapor time to get into all the areas where odors hide.
The OdorXit AQM CLO2 used in 1 day mode works so fast you need to leave the room. Honest, it will work when you're not there!

  • 25 gram packet works best in areas with up to 2000 sq ft of surface area- a large basement with LOTS of items – couches, tables etc. (Remove all cardboard boxes)
  • 10 gram packet works best in areas with up to 1000 sq ft of surface area- a small basement with fewer items
You won't believe how thorough this product controls/oxidizes odors from mold and mildew, smoke, skunk and more. It works even when you're not in the room!
Uncover the Ease of Using OdorXit AQM & MOMS ClO2

OdorXit ClO2 products use the oxidization method to solve odor problems. By definition OdorXit ClO2 is a contact chemistry. IE the chlorine dioxide vapor (the active component of OdorXit ClO2) must come in contact with the source of the odor and the source of the odor must be prone to oxidization.

That is exactly what OdorXit ClO2 does. When the mylar outer covering is removed, the inner pouch containing sodium chlorite and citric acid are exposed to the air and water or water vapor. This combination converts the sodium chlorite and citric acid into chlorine dioxide gas which is a strong but selective oxidizer.

Using the included clear plastic self adhering pouch to mount the packet on a wall, or cabinet or above a door, or on the side of the basement steps works very well. If you have a ceiling fan in the area, set on slow and blowing up. You can also us a small desk fan set on slow or low to circulate the air in the area being treated. Do Not have the fan blowing directly on the packet. The best placement in a closet is on the floor at the base of the clothing. The best bathroom placement is across the room from the shower or tub and away from children.

Chlorine dioxide will oxidize/neutralize a wide range of malodors including mold fungus, mold spores, tobacco smoke, fire smoke, spoiled food, fish, animal scent spray (including cat and skunk), body odor, dust mites, moth balls, animal and human excrement, bed pan, sick room, and cooking odors.

Like all oxidization-based products, OdorXit ClO2 can neutralize or oxidize a finite amount of material. This being said, if the pouch size used is not large enough to do the job, using another one or larger one will continue the process until it is completed. Subsequent re-contamination as is the case with mold and allergens, the treatment simply must be repeated. This fact does not detract from the fact that OdorXit ClO2 is fast acting and completely effective on a very broad range of malodors.

OdorXit ClO2 is simple to use. When you are ready to start treating an area, remove the outer mylar packaging from the inner Tyvek packet and place it in the plastic self-adhering pouch supplied with the product or on a plastic plate or in a plastic cup (with a few drops of water if the relative humidity is less than 40%). The Extended Release mode will produce gas for 20 to 30 days. The Fast Release mode will produce gas for 12 to 30 hours. In either case the same weight packet will produce the same amount of gas. Both the Extended and Fast Release modes require a small amount of water to work. 40% to 70% relative humidity is ideal for this purpose. If the relative humidity is lower than 40% a few drops of water added or damp paper towel can be placed next to or under the packet to trigger the reaction. If the relative humidity is higher than 70% the time the packet will be active will be less but the same amount of chlorine dioxide will be produced. The packet does not work below freezing (32 degrees F or, 0 degrees C ).

Keep OdorXit Products and all odor control products away from small children and pets. As safe as OdorXit Products are, they are serious odor control products, not toys. OdorXit Products should be treated with respect and used with caution.

When using OdorXit ClO2 Slow Release, it is not necessary to vacate the area being treated if the packet being used is the proper size. If a heavy chlorine bleach odor develops leave the treated area or remove the ClO2 packet for a few hours. This situation can occur if the packet is too large for the area being treated or too much water was added to packet.

If you have additional questions or concerns, contact the odor control experts by E-Mail or call us on our toll free help line 1-877-ODORXIT (1-877-636-7948) or (01)513-895-1000. We will return your email or phone call promptly.
Share by: